Sblogloading139

• For iOS, Allow iVCam app using Wi-Fi / WLAN in system Settings;
  For Android, Allow iVCam app using Wi-Fi if it's disabled;
• Allow iVCam PC client software to use the network in Windows Firewall or turn it off;
• Disable VPN or Proxy on Windows if needed;
• Ensure that your phone is using Wi-Fi / WLAN, instead of using mobile network;
• Ensure that your phone is in the same LAN with your PC and connected to the same router. Do not connect to the signal amplifier Wi-Fi;
• Disable the router's AP isolation and guest mode;
• Ensure that your phone can be Ping connected by the PC via its IP address;
• Ensure that the Bonjour service is not disabled (which is installed by iVCam and will run automatically, you can start it in windows “Services” app or task manager). No need to block it because it doesn't use CPU too much;
• Enable UDP broadcasting in your router if Bonjour service is not installed or is disabled, iVCam app can detect your PC via UDP broadcasting as well;
• Reboot your router, ^_^

1. Ivcam Download
2. Ivcam Windows
3. Ivcam For Mac
4. Ivcam Obs

Setting up iVCam is very simple - just download and install our client software on your PC and you're ready to go! The connection is fully automatic and requires no manual configuration. Main Features: - High-quality, real-time video with low latency and fast speed. Automatic connection via WLAN or USB and easy to use. Set in a beautiful seaside town on the Italian Riviera, Disney and Pixar's original feature film 'Luca' is a coming-of-age story about one young boy experiencing an unforgettable summer filled with gelato, pasta and endless scooter rides.

You can also enter the PC's IP address

IVCam is a free application that allows people to turn their handheld devices into webcams for their computers and laptops. IVCam is a cross-platform software that functions with Microsoft Windows PC machines and Android, Apple iOS, and Microsoft mobile phones and tablets to provide a flexible alternative to the standard built-in or clip-on. This video will show you how to use your Phone (iOS/Android) as a Webcamin Windows using iVCam.Read more at: https://capnamanh.com/how-to-use-ivcam-turns-you.

directly in iVCam app to connect if it can't be detected automatically, or connect via USB.

• First, please allow iVCam to pass through the Windows Firewall - you can add it to the firewall exception list, or turn off the firewall;
• Allow iVCam to use network in 3rd security software, close them if you don't know how to do;
• Disable VPN or Proxy on Windows if needed;
• Disable the router's AP isolation and guest mode;
• Ensure that your phone is in the same LAN with your PC and connected to the same router. Do not connect to the signal amplifier Wi-Fi;
• The PC can be detected means that they're in the same network, but maybe not in the same network segment. For example, the phone's IP address is 192.168.0.x, while the PC's 192.168.1.x, so they can't connect to each other. You can google 'How to connect two different network segments' to find a solution and make them connectable;
• Connect via USB.

• For iOS: Make sure that the latest iTunes is installed on your PC and it can recognize your iPhone (Google for help if it doesn't);
• For Android: Follow the detailed steps here.
• Disable Wi-Fi on your phone if necessary.

On PC, allow iVCam application to use network in 3rd security software, close them if you don't know how to do that.
Read more...

• You can use larger video size, higher video quality or frame rate in iVCam Settings for best quality, which requires higher network bandwidth;
• Be closer to your router if you're using W-Fi for connection;
• It is strongly recommended that the PC be connected to the router with a network cable. If you are using WiFi, restart your PC and try again;
• Connect via USB cable if the network is not good enough.

• Use lower video quality, smaller video size or frame rate, and be closer to your Wi-Fi router;
• Select HEVC video encoder in app settings if it's supported by your phone;
• You should have a high-performance Wi-Fi router if you're using W-Fi for connection;
• It is strongly recommended that the PC be connected to the router with a network cable. If you are using WiFi, restart your PC and try again;
• iVCam is real-time video streaming and requires high-performance network, maybe the lagging was caused by your router (especially when video lags at regular intervals), and sometimes a reboot for the router will help;
• Connecting via USB cable or enable hardware decoding in PC client software will also help (if the graphics card supports).

Flickering is often a result of the desynchronization between the shutter speed/frame rate of the camera and the frequency of the AC power that the lights are plugged in to.
A solution is to use a shutter speed/frame rate that is slower than the frequency of the AC power.
For example, the AC power is 60 Hz in US and 50 Hz in Europe, so try shooting at frame rate less than that - 30 fps, 25 fps, 24 fps - and a shutter speed that is slower than the AC power frequency.

• For the frame rate, you can change that in iVCam app settings, 25 fps is a good choice for 50 Hz AC power.
• For the shutter speed, you can long press on the video to enable AE / AF LOCK, then swipe up or down on the video to adjust exposure time (shutter speed). You can do this in the Camera Settings window of iVCam PC client as well.

Sometimes the Face Beautify may cause flicker, disable it in this case. Enable hardware decoding in iVCam PC client software (if the graphics card supports), use a smaller video size or frame rate.

NOTE: Please try to disable the 'Flicker Reduction' in Parallels Desktop if you encounter any problems with DXVA2 and D3D11 hardware acceleration.

First of all, iVCam is a high energy consumption application. Audio and video recording and network transmission will inevitably consume a lot of system resources.
To avoid this problem you can:

• Try to use a smaller video size, lower video frame rate and video quality, and don’t turn on beauty function;
• Try to use USB instead of Wi-Fi to transfer video;
• iVCam will automatically dim the screen after a period of time after the video transmission starts to save power (you can also manually dim the screen in the camera settings of PC client);
• Don’t wear a protective case or cover your phone with other items;
• Ensure that the battery of the mobile phone is healthy enough, and replace the battery if necessary;
• Don't charge while using Wi-Fi for video transmission.

• Please try to enable/disable Hardware Decoding in the menu and try again.
  Or select a different hardware decoder in Settings > Miscs > Hardware Decoding and try again.
• Maybe you're using some webcam protection software, please close it and try again.

For Microsoft Store apps on Windows 10:

1. Go to Start >Settings >Privacy >Camera.
2. Choose your preferred setting for Allow apps to access your camera.
3. Under Choose which apps can access your camera, turn the individual settings for apps On or Off.

iVCam is a standard webcam and can be used with all software or websites.

Ivcam Download

If a software or website can't use iVCam but can use a hardware webcam, it is likely that it intentionally blocked iVCam camera. You can change the device name of iVCam and try again:
In PC client, Settings > Miscs > Device Name

Ivcam Windows

. First, please check if you can find the e2eSoft iVCam device in Device Manager >Imaging devices. If there are no problems:

• For Windows 10, go to Start >Settings >Privacy >Camera and turn on the switch 'Allow apps to access your camera', then run iVCam again.

If the e2eSoft iVCam device could not be found or there're some problems with it:

• For Windows 7 64-bit, please install the system patch KB3033929 according to the iVCam setup application prompt
• Please choose the 'Trust' or 'Install' when installing iVCam and Windows Security ask you whether to trust us and install the iVCam driver
• If driver installation fails due to driver signing issues, you can disable driver signature enforcement and re-install

Please also make sure you're using the latet version of iVCam PC client. We use exactly the data received from phone side to record video files. Sometimes the video will drop frames due to bad network, so the final recorded video file may not be in fixed frame rate, and in some video editing software, it will appear as video and audio are out of sync.
You can use the video format conversion software to convert the recorded MP4 file to fixed frame rate format, and then put it into the video editing software for editing.
You can also:

• Use iVCam Microphone instead of Mobile Phone as the Recording Device in the Settings of the iVCam PC client;
• Use USB connection which is much stable;
• Use smaller video sizes, lower video quality and FPS;
• Use other webcam recording software to record iVCam camera's video, and you can refer here for the sound recording.

Ivcam For Mac

Didn’t find an answer? You can check the instructions, send us the log file, or contact us.

If you have an older or cheaper webcam, the image quality it provides is probably not that impressive. A top tier webcam is expensive, but the powerful camera integrated into your Apple device can prove to be a great alternative.

iVCam is a clever application that enables you to connect to your iPhone or iPad’s webcam wirelessly and use the device’s integrated camera as a webcam. It works together with the iOS iVCam app, and it is very easy to set up.

After setting up the desktop program, you will need to visit the App Store and get the iVCam iOS app. Both applications require almost no configuration, as you just need to ensure they are both on the same wireless network.

A connection should be established automatically, and you will now be able to see through both of your iPhone or iPad’s cameras. There are even some simple image controls that you can play around with in the mobile app.

As you can see from the screenshots, iVCam isn’t exactly a complex program. First-time users should not run into any issues, and the interface features an intuitive layout.

Using the buttons in the bottom-right corner of the UI, you can take snapshots and even record a video. From the settings, you can change the video orientation, size and framerate, as well as the video and audio quality.

Videos and snapshots are saved to your Videos folder, but it does not seem to be possible to select a different path.

Ivcam Obs

All in all, iVCam is an interesting application for users who don’t have a high-quality webcam and wish to use their iPhone or iPad instead. It doesn’t offer a lot of advanced features, but it is very simple to set up.